Building Permits are required for all commercial and residential building structures,
as defined in the Village code. This
includes any new structures, additions
and alterations to existing structures
as well as accessory structures, such
as pools, patios, walls, ponds, gazebos,
cabanas, garages, decks, oil and LP
gas tanks, retaining walls, plumbing
and electrical alterations. A building
permit application is the beginning
point of your project to be reviewed
by the proper departments for approval.
Most permits are valid for one year
and will need to be renewed if a certificate
of occupancy has not been issued.
Inspections are required in every phase of construction
to insure proper installation of material
as directed on your Architectural plans.
Inspections of existing structures
are just as important and required.
Inspections are required for everyone
so structures will be erected correctly
and safely for everyone. Contact the
Building Department at (631) 348-1133
at least 48 hours before inspection
is needed to make an appointment.
Certificate of Occupancy or Compliance is required
for all open permits. The documents
that may be needed to issue a C/O or
C/C are a new survey, Electrical inspection
certificate, Suffolk County Board of
Health final approval, Architects,
Structural and Village Engineers certificate.
All
changes are needed to show on your
C/O open permits and violations need to be satisfied before you can
refinance or sell your property.
Energy Conservation Tips for Your Home
Check all doors and windows for air
drafts or leaks
Weather strip, cover with plastic and caulk gaps
Electrical switches and outlets on
exterior walls
Remove plate cover and install insulated cover underneath original
cover
Check basement windows and doors for
drafts
cover with plastic, weather strip door
Heating System
Have your heating system company service tune up, clean chimney and
burner
Lower thermostat at night and when you are out
Install programmable
thermostat
Lighting interior and exterior
Install energy saving bulbs, reset all timers for shorter on
times
You can also check on line LIPA and Keyspan Energy tips.